Guardian Anti Corosives P Ltd

TUFFCOAT

{ Chrome, phosphate free Conversion Coating }

TUFFCOAT   is a chromate & phosphate free conversion coating, specially formulated for mixed-metal applications such as  aluminium extrusions, aluminium, steel, galvanised steel, etc.,  The coating when properly applied   greatly enhance corrosion protection and adhesion of subsequently applied coatings..

TUFFCOAT  is ECO FRIENDLY & very easy to be controlled and maintained. It deposits high-quality zirconium films at low application temperatures.  The very high conversion coating efficiency  ensures the absolute minimum removal of metal during conversion coating, which gives low levels of sludge and long bath life. 

TUFFCOAT   is capable of cleaning the surface and then give the conversion coating in a single stage.  It does not call for a passivation.

METAGUARD

METAGUARD

Ø Removes rust from steel components, especially machined surfaces of cast iron and forged components, reinforcement steel rods, Galvanized sheets, slotted angles, pipes, structurals, ERW tubes etc. used in bus body construction etc.  

Ø Prevents the formation of Galvanic cells and hence rusting avoided

Ø Forms a NANO COATING, which retards, to a remarkable degree, formation of rust.

SALIENT FEATURES: 

METAGUARD 

  -  is non flammable, non toxic and very safe to use

-  does not contain heavy metals

-  totally biodegradable

-  provides a fantastic bonding strength for the further coating

-  the surface can be painted, powder coated, ED coated, oiled

-  improves the overcoat bonding & finish

-  as it has excellent corrosion resistance, can be kept as it is for many days without rusting.

-  easy to apply

Koldblak functions at 20^o+ C. It blackens steel and cast iron components. Cold blackening process is simple and safe to operate and produce high quality results.

Koldblak forms a copper selenide coating, which when sealed with appropriate oil, wax, etc will provide corrosion resistance to the treated components. Comes in liquid and gel form.

( Mould Release Agent )

SHUTOIL  Reduces friction between flowing concrete and aluform/ ply surfaces, hence eliminating honey combing. Gives smooth concrete finish.

SHUTOIL  is environmental friendly, non-hazardous, having flash point above 140 deg C.

SHUTOIL  is supplied as green/yellowish oil, with specific gravity of  0.84 ± 0.05 at 25⁰ C  and  ready for direct application and use.

SHUTOIL   can be applied by brush, sponge or conventional mould oil-sprayer. Make sure to apply the thinnest coating necessary to achieve effective coverage.

SHUTOIL can be removed by stiff brushing with a good quality detergent and then can be thoroughly rinsed with clean water.

SHUTOIL will cover 250-400 sq ft with one lt.

SHUTOIL comes in 210 lts barrels.

GAC Battery Terminal Cleaner

Exclusive product for battery and its surroundings

Suitable for Battery terminals, battery casings, cable connectors & hold downs

detects leaks and neutralizes acid

Easy to apply.  Just spray and rinse off

Very clearly indicates if any acid is left over.

Non-flammable liquid

GAC

PREMIER CL

Increases the adhesion properties of film and vinyl graphics in most of  automotive detailing.

Enhances the adhesion  to polyethylene, polypropylene, ABS, PET/PBT blends and other  difficult to stick to substrates.

Suitable even for concrete, wood, glass, metal and painted metal surfaces.

Easy to apply - just brush or swab.

In wide areas  use pressurized flow gun.

Clean and dry  the bonding surface before application.

Dries  faster and to a clear finish.

Extremely Flammable liquid

GAC GALSHEEN

Enhances the look of  pieces coming straight out of the Hot Dip Galvanizing.

 Forms a nice film, which is both  flexible and hard. 

Totally lead and chromate free. 

 No chlorinated solvents. .   

Shake well before every  spray for uniform result

Apply to a clean degreased, derusted surface for best results

Product is Flammable