Guardian Anti Corosives P Ltd

SKINVELOPE

         A SOLVENT BASED PEELABLE COATING

SKINVELOPE   has been developed specially for the protection of:

PAINT BOOTHS FROM OVERSPRAY, FINELY MACHINED COMPONENTS, SMALL TOOLS, AUTO PARTS, PRECISION ENGINEERING COMPONENTS, CUTTERS, REAMERS, TOOL BITS, DIAMOND TOOLS, PRECISION GEARS, SPROCKETS, VALVES, SPARK PLUGS, PISTONS, METAL LAMINATES, MIRRORS, ALUMINIUM AND ANODIZED SECTIONS ETC. FINELY FINISHED / GROUND / LAPPED HONED ETC. ALSO USEFUL FOR MASKING OF SELECT AREAS IN THE  PLATING SHOP.

SKINVELOPE is used at ambient temperature. It may be applied by brush, spray or dip.

Detackall

{Very effective denaturing - waste paint solids}

Detackall is an alkaline formulation, liquid preparation, to be used as an additive for the water treatment in the spray booths. It is very effective where mixed paints are used . The effect of Detackall on the over sprayed paint, make sure that the washing chambers, plates and pipe work of the spray booth require less frequent cleaning and the over sprayed paint will float in a conventional denatured non - sticky form for easy removal.

Whenever you start a fresh bath make sure that you clean the booth and the sludge pit thoroughly. Fill the booth tank with fresh industrial water and start the circulation. Detackallis then added to the turbulent area of the reservoir at 1-2 litres per 1000 lts of water in the tank. This addition will give a pH of around 10. This pH will start dropping from the time the paint over spray is mixed with that.

To get the best performance of Detackall the pH must be maintained between the range of 9-10. To maintain the pH, regular replenishments should be made. Its normally assumed that there will be a 40% overspray paint contamination in the booth water. The recommended doses are @ 3-5 % of spray viscosity paints consumption.

With proper lab facilities, a more accurate concentration control by titration can be achieved. Please ask our technical personnal for details.

DETACKALL formulation is well suited to be used with automatic dosing system which may in turn be linked to an electronic pH or conductivity meter.

Remove denatured paint collected into the sludge pit at regular interval for better performance.

Endeepee

[ water washable paste for booth structure ]

endeepee is formulated to a provide masking media to prevent adhesion of paint overspray inside spray booths and fittings.

Details:

• Colour: endeepee is off-white in colour, water based and non-drying.
• Capacity: 10 kg
• Packaging: Container

Salient features:

1. The Dust collecting surface never dries out.

2. Prevents paint penetration and adhesion on the surface.

3. Protects against solvent attack.

4. Being water based it has no fire hazards

5.Can be easily washed with water.

6. Improves work environment as it provides a light reflecting surface.

USAGE:

Thorougly mix the ENDEEPEE paste in the container before application. Give a thick coat by brush to the required structure. The coating being in paste form will not sag.

Each kilogram of ENDEEPEE will cover 20-30 sq ft.

Removal of ENDEEPEE coating is easily carried out by washing with water or by scraping. Contamination with booth water may be avoided while washing.