After being in the chemical manufacturing field for more than four decades we now offer with confidence a range of tank cleaning products to meet the stringent requirements of the Shipping Industry.
TANKLEENER – N is a neutral cleaner with versatile clean ability for various applications. It is used very effectively for the removal of Lube oils, Mineral oils, vegetable oils etc. It is free of solvents, acids and phosphates. It is totally BIODEGRADABLE and hence no danger to humans or environment. Suited to be used both in fresh water and sea water. If needed it can be added to alkaline or acidic cleaners for better cleaning.
TANKLEENER – AL is a strong alkaline cleaner used for removal of vegetable oils, fats and fatty acids. It containes Contains biodegradable surface active agents, chelating agents, potassium hydroxide and propreitory additives It also contains a water-hardness stabiliser. It is a low foaming liquid which is suuitable in freshwater even at a low concentration of 2-5% for circulation cleaning. It is very use on stainless and alkali resistant coatings. Used at ambient to 80 deg C.
TANKLEENER – AC is an acid based cleaner used for removal of white residues like metal Soaps from Vegetable Oils and Vegetable Oil Fatty Acids, Carbonates from Sodium and Potassium Hydroxide as well as white residues from Amines. It is an effective rust remover. It also cleans stainless steel tanks. It is free of solvents and contains biodegradable surface active agents, complexing agents and phosphoric acid. It is low foaming and works from ambient temperature to 80 deg C.
TANKLEENER – EM is an emulsifying Cleaner based on aromatic solvents blended with anionic and non-ionic surface active agents. Safe for use on epoxy, polyurethane, zinc-silicate coatings and stainless steel. It has a flash point of 65 deg C. The product is totally biodegradable. Used by mixing with water at 4-10% at ambient to 90 deg C.
NEATBILGE is a biodegradable, non toxic, non flammable, boat marine bilge cleaner.
NEATBILGE does not contain caustic, acid, ketones, or other toxic substances.
NEATBILGE is specially formulated to clean both ferrous and non ferrous metals and will not harm rubber, wood or fiberglass.
NEATBILGE is water rinsable and leaves no residues.
NEATBILGE is incredibly easy to use - just pour in, run the boat to provide the gentle agitation and pump out to remove grease, scum and sludge, leaving the bilge clean and fresh.
NEATBILGE is very effective at emulsifying oil and sludgy fluids
NEATBILGE cleans boat bilges, machinery, parts, equipment and is great for engine degreasing. Safe and economical for use in marinas, factories, and garages.
NEATBILGE can be used at 5-10%, diluted with water depending upon the grease and oil. For optimum cleaning, heated water from 40 to 50 degrees C works best on greases.
DIRECTIONS: Dilute as needed. Spray on surface, let stand for 1-2 minutes (longer dwell time for heavy build up and stains), agitate with a brush or cloth if needed, rinse clean.
For enclosed bilges and tanks: Dilute as needed, fill tank with diluted NEATBILGE, let stand for 24 hours, drain and rinse tank.